The CNC aluminum jump chamber MGW unit is precision machined to perform accurately and consistently on the HPA MTW Milspec, Forged, Billet and MTW-9 series. The MGW Hopup Chamber unit is built with an aluminum rotary knob for precise jump adjustments, precision Hopup lever and Bucking buttons to perform better and keep BB firing accurate and consistent with every shot. The Hopup Chamber MGW unit is designed to accept the M4 nozzle length of the HPA MTW engine. The jump chamber MGW unit is wisely equipped with an interchangeable inlet adapter to ensure that the jump unit is inserted exactly in the center of the HPA motor nozzle outlet of the inner bore without wobbling. It also mounted removable CNC brass side wings to slide smoothly into the outer barrel grooves, and included an advanced CNC Delrin locking C-clip to keep the inner barrel tight in place without wobbling or twisting.

The Maxx MGW model CNC jump chamber is compatible with:

      Wolverine HPA MTW Milspec, Forged, Billet and MTW-9 Series
      Works with Maple Leaf Wonder and Super GBB hop-up rubber.
      Other GBB rubbers are compatible but to do so it is necessary to cut the flat centering part with a cutter.

Please note that this camera is not compatible with standard AEG rubber; You will need both the GBB rubber and the GBB inner barrel to make it work on your MTW.

Include :

      1 x MGW CNC Aluminum Jump Chamber
      2 x CNC acrylic side cover
      2 x 2.6mm CNC brass side wings.
      1 x CNC steel pivot pin.
      1 x CNC Aluminum Lever
      1 x CNC Aluminum Smooth Round Nub
      1 x CNC Aluminum Smooth Flat Nub
      1 x CNC Aluminum Hard Concave Nub
      3 steel springs.
      1 x CNC steel spring guide.
      1 x Steel Upper Compression Spring
      1 x steel central compression spring.
      1 x CNC Delrin locking C clip.
      1 x CNC Brass Barrel Spacer
      1 x Brass Barrel Oring Spacer Holder
      1 x CNC Aluminum Rotary Knob
      1 x CNC Aluminum Inlet Adapter
      1 set of wedges.
      1 x O-ring set